Two set point, two SPDT relay for on/off control |
Reliable power supply from 85 to 250 V AC/DC withstands voltage fluctuations
Two separately adjustable hysteresis bands prevents rapid contact switching at either set point
Adjustable temperature coefficient and selectable cell constants
Push button one-point calibration; offset temperature calibration
Galvanically isolated 4-20 mA output for remote monitoring or hard copy recording
Two level password protection for calibration and setup parameters
Display toggles between conductivity and °C readings
Removable terminal strips offer quick and easy connections
Battery back-up of memory maintains set-up if power fails
These sturdy, compact controllers withstand voltage fluctuations from 85 to 250V AC/DC! They are ideal for installation were electrical fluctuations are common, or install them in series throughout areas of differing electrical conditions.
Advanced setup mode lets you select cell constant, temperature coefficient, manual or automatic temperature compensation, hysteresis band and more. It also lets you view previous calibration points.
The 1/8 DIN housing is ready to install in standard panels and NEMA rated boxes. Includes mounting hardware; accepts probes with stripped ends and Pt 100 RTD ATC elements.
||0.00 to 20.00 µS, 0.0 to 200.0 µS, 0 to 2000 µS, 0.0 to 10.00 mS, 0.00 to 20.00 mS, 0.0 to 200.0 mS
||0.01 µS; 0.1 µS; 1 µS; 0.01 mS; 0.1 mS
||0,1, 1, or 10
||one point, slope calibration
||-10.0 to 110.0 °C
||offset up to ±10°C
|Number of inputs
|Number of set points
||2 SPDT nonpowered relays, 6A at 110 VAC; 250 VAC max.
||4-20 mA output, isolated
||0 to 10% of range, adjustable for each set point
||automatic or manual, from 0 to 100°C
||4-digit, 14 segment scrolling LED
||0 to 50°C
||1.9" x 3.8" x 6" (4.8 x 9.6 x 1.5 cm)
||0.5 lb (0.2 kg)